BW-VG225 Low-Cost CAN BUS Dynamic Inclinometer High-Performance
Introduction:
BW-VG225 is suitable for engineering machinery, unmanned driving, platform stability and other fields. It is a high-performance and low-cost inertial measurement equipment, which can measure the attitude parameters of moving carrier. It adopts MEMS accelerometer and gyroscope with high quality and reliability. Through various compensations such as nonlinear compensation, temperature compensation and drift compensation, it can greatly eliminate the error caused by interference and improve the product accuracy.
Performance Index:
| Attitude Parameter | Dynamic accuracy | 0.5° |
| Static accuracy | 0.01° |
| Resolution | 0.01° |
| Tilt margin | Pitch±90º,Role±180º |
| Physical properties | Dimension | L60 x W59 x H29(mm) |
| Weight (with wire) | 280g |
| Weight (With packaging) | 360g |
| Interface characteristics | Start delay | <50ms |
| Maximum sampling rate frequency | 100Hz |
| Serial communication rate | 2400 to 115200 bps |
| Digital output format | Binary high-performance protocol |
| Trouble-free work on average | ≥90000 hours |
| EMC | According to GBT17626 |
| Insulation Resistance | ≥100MΩ |
| Surge suppression | 2000g,0.5ms,3 Times/axis |
Application:
● Construction Machinery
● Platform stability
● Agricultural machinery
● ROV underwater robot navigation
● Unmanned Drive
● Robot
BWSENSING's Accuracy Traceability System:
Company introduction
Wuxi Bewis Sensing Technology LLC(BWSENSING) is an innovative fast growing company established in 2010. The company was born in The Institute of Microelectronics (IME) of Peking University. We have achieved the top spot in the middle and high-end industry applications in the Chinese market.
From 2019, BWSENSING ® is approved as our global brand.With 10 years experience in the research-design-development and manufacture of a range of Inertial sensor technology, BWSENSING posses the skills, knowledge and experience to provide fully integrated OEM/ODM design and manufacturing services for Inclinometer, Electronic Compass, IMU, AHRS, GNSS/INS and Fiber Optic Gyroscope. As the company co-founder Dr. Guangyi Shi said, we will use the Accurate and Cost-effective sensors to make a greater contribution to the global society for a better IoT world.
FAQ
Q1: Accuracy definition of products
A: RMS accuracy, the accuracy of each product can be traced.Accuracy test report can be provided if required.
Q2: How to select suitable model?
A: Users should check the following points:
a. Single or dual axis?
b. Commom protocol, Modbus or CAN?
c. Dynamic or static Application scenarios?
d. Horizontal or vertical installation?
Q3: How to purchase?
A: If you want sample, please purchase on BWSENSING online shop. We accept Paypal/TT/CC.If you purchase in bulk, it is recommended to consult the sales for the best price.
Q4: How long is the warranty period?
A: One year.
Q5: Fast troubleshooting for CAN products that cannot communicate
1. Firstly, the sensor's power supply voltage is determined according to the label of the sensor, and the output mode is wired according to the corresponding interface mode, and the corresponding protocol is used;
2. Use a multimeter to check the power supply voltage to ensure that the power supply is normal;
3. Configure the serial port parameters for communication, set the correct product address (normal protocol factory default 00, Modbus protocol factory default 01), select the correct baud rate (default 9600), open the computer device manager to confirm that the COM port number is selected correctly.
Product Tags:
|
|
BW - VG225 Low Cost High Performance CAN BUS Dynamic Inclinometer Tiltmeter Images
|
